Acrylic waterproof plaster with granite look in paste form, ready for use in various colors. It contains colored aggregates for providing a smooth or coarse decorative surface.<\/p>\r\n
It exhibits great adherence and high elasticity and does not crack. It is waterproof and with high resistance to frost. Suitable for interior and exterior use, ideas final coating on building fa\u00e7ade thermal insulation systems. It can be applied on all surfaces, like plaster, concrete, gypsum board, cement board, etc.<\/p>\r\n
Clean the application surface and remove any dust, oil, loose parts, etc. On extremely smooth or non-absorbent surfaces, a suitable treatment must make the surface \u201crough\u201d before the application. Then prime the surface using the same paste diluted at a 2:1 ratio of its volume with water, so that it can be applied with a paintbrush or roller. Once the primes has dries, after at least 2-3 hours, apply TEPOGRANITE, by pressing it with a smooth metallic spatula, after mixing it with a electrical low rpm mixer (approx. 300 rpm). After approximately 20 minutes, make the final finishing using a plastic spatula.\r\nThe time for the final finishing depends on the absorbency of the substrate and the ambient temperature. During the application, the surface must be protected from rain.\r\nDensity: approx.. 2 Kg \/ lt.\r\nApplication temperature: From +5\u03bf C to +30\u03bf C\r\nCleaning: Tools and hands can be cleaned with water before they dry.<\/p>\r\n
2 kg \/ mm thickness \/ m2, suggested thickness approx. 2 mm<\/p>\r\n
Container 25 Kg<\/p>\r\n
Store in its original sealed container in areas protected from sun radiation and frost.<\/p>\r\n